Dongying Dosun Mechanical Automation Co.,LTD

All
  • All
  • Title
Home > Products > Pouring Robot > Investment Casting Pouring Robot

Investment Casting Pouring Robot

Dongsheng Pouring Manipulator Investment Casting with CE

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...
Investment casting metal pouring robot

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...
Dosun Robotic Arm Pouring Manipulator Car Spare Part

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...
Robotic Arm Pouring Manipulator Car Spare Part

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...
Robotic Arm Pouring Manipulator

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...
Robotic Arm Pouring Manipulator Car Part Casting

Brand: DS

Packaging: steel structure and MDF

1.Installation requirements 1.1.Place the fixtures in place according to the following plane layout. 1.2.The casting manipulator is installed with the anchor, and the embedded depth of anchor bolt is more than 600mm. The installation floor should be...

China Investment Casting Pouring Robot Suppliers

Dear customer.
We are grateful to you for using our Pouring Robot, please give us your feedback or suggestions in time after use, we will be very grateful for your support. Before using this equipment, please read the following content carefully, it will be of great help to the equipment problem in the future.

1. The voltage used by this equipment must be in line with meet the national grid power supply standards.
2. This equipment must wear the relevant protective measures when using the operation.
3. The operator must read this manual carefully before use and operate strictly according to the operating procedures.

"Maintenance is more important than repair, and repair is more important than construction". Correct operation and maintenance is the necessary guarantee to extend the life of this equipment.

Home > Products > Pouring Robot > Investment Casting Pouring Robot

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send